HOW TO USE: TREE GENIE XL

To release the foot pedal, first slide the
upper lock away from the stand and
raise the lower lock into the upper position.

Gently lift the foot pedal upwards
to open the clamping mechanism.
5 clamps will spring into a vertical
position.

Give the trunk a straight and even
cut. Set the trunk in the center of the
stand over the spike. Make sure the
trunk and spike have contact but do
not use force. Do not drill a hole into
the trunk. Push down the foot pedal.
Repeat pushing until the clamping
mechanism securely fastens the trunk.

Push down the foot pedal. Repeat
pushing until the clamping mechanis
securely fastens the trunk.

When tree and trunk are well positioned,
put the lower lock (2)
back into down position and slide
the upper lock (1) towards
the tree to secure the Christmas tree
stand.

Add tap water to keep your tree
fresh. Slowly fill the tank with tap water
until the level indicator is clearly
visible. Stop adding water. Always
keep the inner container filled with
tap water.

USER MANUAL: Tree Genie XL